What does Error Code P0352 mean?
Moderate Issue
DTC Code P0352 indicates an issue with the Ignition Coil 2 Control Circuit, where the ECM's command state does not align with the actual state, affecting the ignition coil's ability to generate the necessary spark for combustion.
What are the symptoms of Error Code P0352?
- Engine Light ON: The check engine light or service engine soon warning light illuminates, indicating a potential issue with the ignition coil 2 control circuit.
- Lack/Loss of Power: The vehicle may experience a noticeable reduction in power, which can be linked to the malfunctioning ignition coil affecting engine performance.
- Engine Harder to Start: Starting the engine may become more difficult due to the compromised ignition coil 2, affecting the ignition process.
- Engine Hesitation: The engine may hesitate during acceleration, which can be attributed to the faulty ignition coil 2 disrupting the ignition timing.
- Rough Engine Idle: The engine may idle roughly, as the ignition coil 2 issue can lead to inconsistent firing of the engine cylinders.
What causes Error Code P0352?
- The ignition coil 2 may be faulty, leading to improper spark generation and engine misfires.
- An open or shorted harness in ignition coil 2 can disrupt the electrical flow, causing the circuit to malfunction.
- Poor electrical connections in the ignition coil 2 circuit can result in intermittent or weak signals, affecting engine performance.
- A malfunctioning Engine Control Module (ECM) can fail to send the correct signals to ignition coil 2, leading to ignition issues.
Find the Root Cause with AI
Analyze symptoms and error codes with artificial intelligence for a precise diagnosis
Fast Diagnosis in under 3 minutes
Precise AI-powered analysis
Free No hidden fees
Data-Driven Over 40,000 reference cases
How to fix Error Code P0352?
- Verify DTC Code: Confirm the presence of DTC P0352 using an OBD-II scanner. Check for any additional codes that may be related to the ignition system.
- Inspect Ignition Coil 2: Visually inspect Ignition Coil 2 for any signs of damage, corrosion, or loose connections. Ensure the coil is properly seated and connected.
- Check Wiring and Connectors: Examine the wiring and connectors leading to Ignition Coil 2. Look for any signs of wear, fraying, or disconnection. Repair or replace as necessary.
- Test Ignition Coil 2: Use a multimeter to test the resistance of Ignition Coil 2. Compare the readings with the manufacturer's specifications to determine if the coil is functioning correctly.
- Inspect Power Supply: Check the power supply to Ignition Coil 2. Ensure that the voltage is within the specified range when the ignition is on.
- Check ECM/PCM: Inspect the Engine Control Module (ECM) or Powertrain Control Module (PCM) for any faults or issues that may affect the ignition coil control circuit.
- Perform Functional Test: Conduct a functional test of Ignition Coil 2 by swapping it with another coil. Observe if the problem follows the coil to determine if it is faulty.