What does Error Code P0339 mean?
Moderate Issue
DTC Code P0339 indicates an intermittent issue with the Crankshaft Position Sensor 'A' Circuit. This code is triggered when the signal from the crankshaft position sensor to the Electronic Control Module (ECM) is inconsistent or high.
What are the symptoms of Error Code P0339?
- Engine Light ON: The check engine light or service engine soon warning light illuminates, indicating an issue with the crankshaft position sensor circuit.
- Lack/Loss of Power: The vehicle may experience a noticeable reduction in power, which can be linked to the crankshaft position sensor providing intermittent signals.
- Engine Stall: The engine may stall unexpectedly, often due to the crankshaft position sensor failing to provide consistent data to the engine control module.
What causes Error Code P0339?
- The crankshaft position sensor may be faulty, leading to intermittent signal issues.
- An open or shorted harness in the crankshaft position sensor can disrupt the signal.
- Poor electrical connections in the crankshaft position sensor circuit can cause intermittent signals.
- A damaged signal plate can affect the sensor's ability to read the crankshaft position accurately.
- A faulty starter motor can cause irregularities in the crankshaft position sensor readings.
- Issues in the starting system circuit can lead to intermittent sensor signals.
- A dead or weak battery can result in insufficient power for the sensor to function properly.
Find the Root Cause with AI
Analyze symptoms and error codes with artificial intelligence for a precise diagnosis
Fast Diagnosis in under 3 minutes
Precise AI-powered analysis
Free No hidden fees
Data-Driven Over 40,000 reference cases
How to fix Error Code P0339?
- Initial Battery Check: Verify the battery voltage and ensure it is fully charged. A weak battery can cause intermittent issues with the crankshaft position sensor.
- Visual Inspection: Inspect the crankshaft position sensor and its wiring for any visible damage, corrosion, or loose connections.
- Check Starter Functionality: Ensure the starter is functioning properly, as a weak starter can also trigger this code. Replace if necessary.
- Sensor Signal Test: Use an oscilloscope to check the signal from the crankshaft position sensor. Look for any irregularities or interruptions in the waveform.
- Wiring Continuity Test: Perform a continuity test on the wiring harness connected to the crankshaft position sensor to ensure there are no breaks or shorts.
- ECU Check: Inspect the Engine Control Unit (ECU) for any stored codes or issues that might affect the crankshaft position sensor's performance.
- Replace Sensor if Necessary: If all other components are functioning correctly, consider replacing the crankshaft position sensor.