
What does Error Code P0117 mean?
Critical Issue
DTC Code P0117 indicates a low voltage issue in the Engine Coolant Temperature Sensor Circuit, suggesting a deviation from the normal operating range as monitored by the Engine Control Module (ECM).
What are the symptoms of Error Code P0117?
- Engine Light ON: The Engine Light or Service Engine Soon Warning Light illuminates, indicating a potential issue with the engine coolant temperature sensor circuit.
- Poor Fuel Economy: The vehicle may experience reduced fuel efficiency due to incorrect temperature readings affecting fuel mixture adjustments.
- Engine Overheating: The engine may overheat as the cooling system may not function optimally without accurate temperature data.
- Hard Starting: The engine may be difficult to start, especially in cold conditions, due to incorrect temperature readings.
- Rough Idle: The engine may idle roughly as the incorrect temperature data can affect the air-fuel mixture.
What causes Error Code P0117?
- The engine coolant level may be low, leading to inaccurate temperature readings.
- A faulty engine coolant thermostat can cause incorrect temperature regulation.
- The engine coolant temperature (ECT) sensor might be malfunctioning, providing erroneous data to the ECM.
- The ECT sensor harness could be open or shorted, disrupting the signal transmission.
- Poor electrical connections in the ECT sensor circuit can lead to intermittent or incorrect signals.
- A malfunctioning engine control module (ECM) might misinterpret the sensor data, triggering the error code.
Find the Root Cause with AI
Analyze symptoms and error codes with artificial intelligence for a precise diagnosis
Fast Diagnosis in under 3 minutes
Precise AI-powered analysis
Free No hidden fees
Data-Driven Over 40,000 reference cases
How to fix Error Code P0117?
- Check Engine Coolant Level: Inspect the coolant level at the reservoir. A low level may indicate a leak, which should be addressed before further diagnostics.
- Inspect ECT Sensor Wiring: Examine the wiring and connectors for the Engine Coolant Temperature (ECT) sensor for any signs of damage, corrosion, or disconnection.
- Test ECT Sensor: Use a multimeter to measure the resistance of the ECT sensor. Compare the readings with the manufacturer's specifications to determine if the sensor is faulty.
- Replace ECT Sensor: If the sensor is found to be faulty, replace it with a new one. Ensure all connections are secure and free from corrosion.
- Replace Engine Coolant Thermostat: As a precaution, replace the engine coolant thermostat to ensure proper functioning of the coolant system.
- Clear DTC and Test Drive: Clear the DTC code from the vehicle's computer and perform a test drive to ensure the issue is resolved and the code does not return.